The Problem

Each year, US$6.5 trillion is spent globally making electricity.

Approximately 10% of this electricity, worth €650 billion, is used to manufacture compressed air. Compressed air is used in some capacity in almost 76% of manufacturing worldwide. It is estimated that 40% of all compressed air used in industry is unavoidably wasted through leakage, blow-off, or more especially…idle time. This equates to a global cost of making such waste of approximately $260 billion annually (World Energy Expenditure, Nathalie Desbrosses).

Wastage through leakage, blow-off and idle- time has been accepted for decades, largely because of the absence of an efficient solution. Although very expensive to produce, it is normal practice in a manufacturing facility for waste compressed air to be used to clean work benches, dry paint or even heat sections of the working area. Most factories operate a centrifugal compressor pushing compressed air at 8 to 10 Bar through a house line. Individual manufacturing cells situated along the house line draw their compressed air from it, often feeding it into a secondary compressor to increase the bar pressure further before using it. If none of the manufacturing cells are calling for air, the house compressor can ramp down but rarely switch off as the compressor manufactures only allow a maximum of 6 shut down per hour. The compressor continues to generate, then dump the compressed air it has generated. It is not unusual to have house compressors run for 10 minutes without supplying air to the manufacturing cells. During this time, the inlet valve remains open enough to generate bar sump pressure, whose only function is to force the oil through the compression chamber to lubricate the machine. This bar pressure is then dumped to atmosphere through the blow down valve.

The Solution

Static Hydro Energy intends to harvest this huge and, heretofore wasted resource, and use it to generate electricity. This electricity can then be used to lower power bills at the factory, or it can be sold directly to the grid. Our technology provides a simple, yet lucrative solution to a decades old problem, delivering considerable financial returns in an era of rapidly increasing electricity costs.

Other Possible Applications

Battery For Solar/Wind

Wastage through leakage, blow-off and idle- time has been accepted for decades, largely because of the absence of an efficient solution. Although very expensive to produce, it is normal practice in a manufacturing facility for waste compressed air to be used to clean work benches, dry paint or even heat sections of the working area. Most factories operate a centrifugal compressor pushing compressed air at 8 to 10 Bar through...

Pharma Industry

Wastage through leakage, blow-off and idle- time has been accepted for decades, largely because of the absence of an efficient solution. Although very expensive to produce, it is normal practice in a manufacturing facility for waste compressed air to be used to clean work benches, dry paint or even heat sections of the working area. Most factories operate a centrifugal compressor pushing compressed air at 8 to 10 Bar through...

Data Centers

Wastage through leakage, blow-off and idle- time has been accepted for decades, largely because of the absence of an efficient solution. Although very expensive to produce, it is normal practice in a manufacturing facility for waste compressed air to be used to clean work benches, dry paint or even heat sections of the working area. Most factories operate a centrifugal compressor pushing compressed air at 8 to 10 Bar through...

Let's Work Together